FOIL DRIVE UNIVERSAL MINI POD

The Mini Pod is designed to fit almost every mast on the market. Three strap sizes (Small 95–110mm, Medium 112–128mm, Large 130–145mm) combined with a 7-position ladder adjustment system on the Inner Pod give you a wide range of fitment options. Most masts use the Medium strap. If your mast falls outside these dimensions or has an unusual shape, we recommend visiting your nearest dealer to check fitment in person.

The Mini Pod is compatible with V2 Motors with a removable cable. The Inner Pod mounts directly to the V2 Motor using the four included M4 x 16mm bolts.

The strap and latch system is completely toolless. The pod can be attached or removed in seconds once on your mast. The only exception is the one-time mounting of the Inner Pod to your motor, which requires a tool to drive the four M4 x 16mm bolts. After that, you're good to go without any tools.

The included Mast Cable Guide helps route your motor cable neatly, but you'll also need electrical tape (not included) to secure it to the mast. This is important for a smooth, vibration-free ride. Check the system manual for full taping instructions.

Match the strap size to the chord width (widest point) of your mast: Small for 95–110mm, Medium for 112–128mm, and Large for 130–145mm. The measurements are printed directly on each strap for easy reference. When inserting the strap into the pod, the printed side should face away from the mast. If you're unsure, most masts in the market use the Medium strap.

The Mini Pod's smaller profile reduces wetted surface area compared to traditional universal mounts, which lowers drag and turbulence around the motor. Riders typically notice improved motor traction, smoother surface motoring, easier take-offs, and cleaner touchdowns on recovery.